What is a pike tool?

What is a pike tool?

Pike poles are a staple tool of Truck Company work. They are generally used for poking holes in walls and ceilings, and then pulling drywall or plaster/lathe off the studs. This is done to find fire that has extended into the walls and ceilings so it can be extinguished. Pike poles come in many sizes and variations.

What is a pike pole and its use?

Pike poles are long metal-topped wood, aluminum, or fiberglass poles used for reaching, holding, or pulling. They are variously used in construction, logging, rescue and recovery, power line maintenance, and firefighting.

How much does a pike pole weight?

5 to 10 lbs

What is a Clemens hook?

The Clemens Hook/Wrecking Tool II is an improved design of the original Clemens Hookthat has been field tested and proven to be a tool that makes Firefighting jobs a little easier. This tool gives the firefighter more versatility in doing many of todays firefighting jobs that now require several different tools.

What is a New York hook used for?

The New York roof hook (or halligan hook) is a firefighting tool used for multiple purposes including pulling and prying. Developed in the 1940s by FDNY Deputy Chief Hugh Halligan, the tool is composed of a long shaft with two triangular-shaped ends jutting in opposite directions.

What is a fire hook?

1 : a stout pole having a hooked metal head and used especially in firefighting for tearing down walls or ceilings. 2 : a hook for raking a furnace fire.

How do you carry Halligan?


  1. Lean to the left and pull shoulder strap off your shoulder a bit.
  2. Slide halligan down side of bottle.
  3. Orientate halligan head to a position of comfort.
  4. Done – you’re ready to go.

Which is an advantage offered by the K Tool?

The benefit of a K-tool comes where it is impractical or dangerous to break the door, for example, the large plate-glass doors in front of a commercial building will quickly yield to a well-placed blow from an axe, but may send fragments of glass flying, and will result in a pile of broken glass.

Which tool is classified as a prying spreading tool?

Prying and spreading tools include claw bar, crowbar, and Halligan tool. Pushing or pulling tools—Extend your reach and increase the power you can exert upon an object. Pushing and pulling tools include pike poles, closet hooks, K tools, and ceiling hooks. Striking tools—Used to apply an impact force to an object.

Which tool combines an adze a pick and a fork?


A “cutter mattock” combines both axe and adze blades
Classification Digging tool
Related Pickaxe

What is a fireman’s AXE used for?

Firefighters often use axes to assist with investigating fire spread and/or hotspots in hidden areas (which could reignite) during the overhaul phase. The axe can be used to strike or chop through walls, ceiling, floors and roofs voids to inspect the areas.

What is a firefighter AXE called?

A Halligan bar, also known as a Halligan tool (sometimes also “Hooligan tool”), is a forcible entry tool used by firefighters and law enforcement.

Which type of tool is a pick head AXE?


Which is the most common type of fixed lock in use today?

cylindrical lock

Which is one of the four major categories of door locks?

Locks can be classified into four major categories: Cylindrical locks—Most common fixed lock in use. One side of the door usually has a key-in-the-knob lock; the other side will have a keyway, a button, or some type of locking mechanism. Padlocks—Most common locks on the market.

Which tool can be used to unscrew a lock cylinder?


What tool is best for breaching a floor?

Tools that can be used to breach a wall are a halligan-type tool, an axe or a hook. The metal hook is the preferred hook, if you have it. A wooden hook will work, but you must use extreme caution to avoid breaking the wooden handle.

Which type of lock is surface mounted on the interior of the door frame?

Rim locks

Which type of glass is used in most sliding doors?

Tempered glass

What is the glass in a door called?

pane. noun. a flat piece of glass in a window or door.

What should I look for in a sliding patio door?

Sliding Patio Door Glass Selection

  • Wood – elegant, traditional and more expensive relative to other materials.
  • Vinyl – inexpensive and cost-efficient, but extreme temperature shifts can cause cracks.
  • Fiberglass – can look like wood, without the drawbacks.

How do I identify a sliding glass door?

How do I find the manufacturer of my sliding glass door? Your best source of replacement parts will be the retailers that sell new doors of the same make as yours. The manufacturer’s name is usually stamped on the hardware or etched in a corner of the glass.

What is the difference between Andersen 200 and 400 Series patio doors?

So What’s the Difference? The main difference between Andersen 200 and 400 Series Windows is the level of customization and color. The 200 series is Andersen’s mass market option for replacement wood windows, while the 400 line is their premium wood window product.

Are patio door handles universal?

So long as the handle does not interfere with other parts of the door, you can use it. Manufacturers have made “universal” types of patio door handles which replace all sorts of old handles and locks.

How do I make my sliding door smoother?

How to Adjust a Sliding Glass Door

  1. 5 Easy Tips to a Smoother Glide. As Seen On.
  2. Step 1: Clean the Sliding Glass Door Track. Standard sliding glass doors all have tracks.
  3. Step 2: Lubricate the Sliding Glass Door Track. Use WD-40 or a silicone based lubricant and spray the entire track.
  4. Step 3: How to Adjust Sliding Glass Door Rollers for a Smoother Ride.

Why is my sliding door so hard to open?

According to This Old House, debris build-up is the main reason for a sliding door that refuses to glide. Dirt, mud, hair and fur can collect along the track and in the groove, which clogs the rollers underneath and prevents smooth motion. Here’s how you can clean the rollers and the track.


Andrey is a coach, sports writer and editor. He is mainly involved in weightlifting. He also edits and writes articles for the IronSet blog where he shares his experiences. Andrey knows everything from warm-up to hard workout.